- Contact Person : Ms. ZHANG XIAOLI
- Company Name : Winko International Trading Company
- Tel : 029-83204989-15809208085
- Fax : 0086-29-82682652
- Address : Yunnan,KUNMING,ZUO'AN BOARDING HOUSE B-3-1401, 220 NO. 3, 2ND WEST ROUND CITY ROAD KUNMING, YUNNAN, CHINA
- Country/Region : China
Turning over sling with cutting machine
Related Product Searches:Turning over sling with cutting machine,High Quality,Turning over sling with cutting machine, lifting sling,AZ-311T
turning over sling turns the cake (together with mould and side board) with 90 degree in the air, conveys the cake to cutting board or cutting cart, demoulds the cake, then the cake can be cut.
turning over sling is one of the main equipment in the AAC porduction equipments.
Main technical date:
| SERIAL NUMBER | SIZE | LIFTING WEIGHT |
| 1 | 4.2M | 2×5T |
| 2 | 6M | 2×6T |
Movable step cutting machine:
capacity: 50,000cbm-150,000cbm/year
size of the cake: 4×1.2×0.6m (net)
cutting cycle:5/10mm (vertical cutting/ cross cutting)
cutting percision:±3 ±1.5 ±1.5 (length,width,height)
production cycle:5t
quality of the master cutting machine: 12t (vertical cutting/ cross cutting)
installed capacity of the master cutting machine: 11.4kw (including hydraulic station)
Working principle:
Turning over sligh turns the mould with 90 degree and demoulds it, the cake together with the side board of the mould are placed on the cutting board, the vertical cutting device cuts the cake as it moves under the drive of its motor. after completing the side, it moves to the pause position. cross cutting device oves to the middle of the cake stop there and then starts the cross cutting.
Fixed step cuttng machine:
capacity:100,000cbm-300,000cbm/year
size of the cake: 6×1.2×0.6m (net)
cutting cycle:5/10mm (vertical cutting/ cross cutting)
cutting percision:±3 ±1.5 ±1.5 (length,width,height)
production cycle:6t
quality of the master cutting machine: 18t (vertical cutting/ cross cutting)
installed capacity of the master cutting machine: 12.9kw (including hydraulic station)
Working principle:
Turning over sling turns the mould with 90 degree and demoulds it, the cack together with the side board of the ould are placed on the cutting cart. started by the motor, the cutting cart moves slowly through the functioning vertical cutting device to complete the vertical cuttng. then it moves to the middle of the cutting device and stops there, the cross cutting device is started at this moment. the cutting frame drops vertically, then after cutting the cake horizontally, cut the cakes from the horizontal side it will return to its original position.
Turning over sling with cutting machine
